usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0 ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbcore: registered new interface driver usbserial IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready This particular part seems it might be a problem home/gina/arduino-1.8.10/hardware/tools/avr/bin/avrdude -C/home/gina/arduino-1.8.10/hardware/tools/avr/etc/nf -v -patmega328p -carduino -P/dev/ttyUSB1 -b57600 -D -Uflash:w:/tmp/arduino_build_641079/:iĪvrdude: ser_open(): can't open device '/dev/ttyUSB1': No such file or directory Sketch uses 924 bytes (3%) of program storage space. This report would have more information withĪrduino: 1.8.10 (Linux), Board: 'Arduino Nano, ATmega328P (Old Bootloader)' User configuration file does not exist or is not a regular file, skippingĪvrdude: stk500_recv(): programmer is not respondingĪvrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00Īvrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00 User configuration file is '/home/gina/.avrduderc' System wide configuration file is '/home/gina/arduino-1.8.10/hardware/tools/avr/etc/nf' Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Sketch uses 924 bytes (2%) of program storage space. Arduino: 1.8.10 (Linux), Board: 'Arduino/Genuino Uno'

Avrisp mkii programmer not responding